What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
Are you currently searching for help around No Hot Water — Water Heater Repair?
Several modern homes utilize an electrical hot water heater for their heating system, due to its comfort and also convenience of use. However, just like any other electrical home appliances, issues might emerge with its use, unexpectedly. It can be really aggravating to get up to a chilly shower as opposed to a warm one or having your bathroom with water that isn't warm enough or even as well hot. Whatever the situation may be, hot water heater issues can be rather aggravating. The good news is, we have actually made a checklist of feasible remedies to your hot water heater issues. There are a variety of factors that could cause many of these troubles, maybe a concern with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you shut off the main power supply for safety. Whatever the problem is, getting it fixed must not position too much of a concern if you comply with these steps:
Call A Specialist:
If after changing all faulty components as well as resetting your temperature, the hot water heater still isn't working, you may need to get in touch with an expert plumber for a professional point of view. The trouble with your heating unit could be that the hot and cold taps have been switched over or it might be undersized for the quantity of hot water needed in your home. Whatever the situation may be, a specialist plumber would help address the issue.
Check Your Power Supply:
As standard as this may seem, it is really required. Without adequate power, your hot water heater will not operate. So the first thing to do when your water unexpectedly stops working is to validate that it isn't a power issue. Check if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the concern, just turn it on and off again. Change any type of broken or damaged fuse. Test the device with power after these modifications to see if it's currently working.
Examine Your Thermostat:
If your water heater still isn't working or the water coming out isn't warm enough, you might need to examine the temperature setups on your upper thermostat. Make certain the circuit breaker is turned off before doing anything. Open up the gain access to panel and also press the red button for temperature level reset above the thermostat. This must help heat up the water. Turn the breaker back on and inspect if the trouble has been settled.
Inspect the Burner in the Water Heater:
If it's not a power issue, after that try looking into your heating element if it is still functioning. Test each of your heating elements to ensure the problem isn't with any one of them. If any one of them is defective, change that part and after that inspect whether the hot water is back on.
Final thought
Hot water heater problems are not constantly significant. A lot of them are because of small issues like a blown fuse or worn-out burner. Changing the faulty components need to do the trick. Nevertheless, if you are still incapable to address the trouble, give a call to your nearest plumber to find to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I'm certainly very eager about How to Troubleshoot and Repair an Electric Water Heater and I am praying you enjoyed the article. Liked our review? Please share it. Help other people locate it. Thanks a bunch for your time. Visit us again soon.
Schedule Today
Report this page